ATX® Half Rack - Wall 810 - Height 197 cm

ATX® Half Rack - Wall 810 - Height 197 cm - Made in Europe

Item no.: ATX-HRW-810

This ATX® Half Rack sets standards when it comes to the heaviest training sessions in confined spaces.

With its height of 197 cm, it should fit into most basements. Thanks to its space-saving depth of 58 cm, the basement can also be used for other purposes. The extremely stable post dimensions of 80 x 80 x 3.0 mm of the heavy-duty ATX Series 800 meet professional requirements, and this half rack is also certified for studio use in accordance with EN 20957 I.II.IV - S.

You will probably never have seen a solid half rack of this quality in a basement.

The vertical rack posts correspond structurally to the ATX® "4-Direction Uprights", which form the core of every ATX® 4.0 RIG system. The innovative post system offers an unrivaled wide range of applications that is unmatched on the market. The posts have the same design on all four sides; this applies to the hole pattern as well as the scaling on all four sides. There is therefore no difference between front and rear or right and left with these posts. The ATX® 4D Upright can therefore be installed in any orientation and used equally from all four sides without restriction. The EU manufacturing process using laser cutting guarantees consistently high post quality.

Thanks to its selection of optional accessories, you can use this ATX® Half Rack to create your own personal training center in the basement or another room with a low ceiling height, with absolutely professional ATX® quality. By using the 4D posts, the range of ATX® Rig accessories and components is extended to include our selection of accessories for racks for the 800 series.

Compact ATX® Wall Rack / Half Rack - for wall mounting - particularly suitable for low ceiling heights

with vertical ATX® 4D posts

Made in Europe

Provides optimum training conditions for heavy basic exercises (e.g. squats)

Space-saving half rack for wall mounting (only 58 cm deep)

Includes pull-up bar for high training loads of up to 350 kg

Continuous hole grid - bore Ø 21 mm, 35 holes

Heavy load capacity up to 600 kg

Color: black

Can be optionally extended with many other accessories

Tip: You will need 30 mm wrenches / socket wrenches to assemble the Half Rack components. We offer these as accessories below if your stock of tools does not include this size.

Assembly instructions:

The ATX® Half Rack- 810 must be anchored to the floor + wall as standard!

Additional connectors are optionally available for wall mounting only. > HRW-800-BRA

These additional connectors, with which the rack is additionally fastened to the wall underneath (doweling), eliminate the need for doweling to the floor.

So if, for technical reasons, you cannot or do not want to anchor the Half Rack to the floor, you can securely fasten the rack to the wall with these additional connectors.

The ATX® Half Rack is supplied without the dowels required for floor and wall mounting! For secure wall mounting, the existing building structure and the selected mounting materials must be compatible. Please consult your specialist dealer for mounting materials if necessary.

The weight bars and weight plates shown are not included in the scope of delivery!

Price per half rack

We will be happy to provide you with a quote including shipping costs. Simply ask us using the contact form or call us on 0049 911 521919-10.